Intoduction to the Course
Introduction to the MQ Telemetry Transport (MQTT) Protocol
The MQTT Architecture and Core Concepts
Setting Up the IDE
Developing Required Generic Drivers
-
Important information about this section
-
Programming : Enabling the Floating Point Unit (FPU) (18:00)
-
Programming : Developing a UART Driver - Analyzing the Documentation (11:35)
-
Programming : Developing a UART Driver - Listing out the steps (4:00)
-
Programming : Developing a UART Driver - Implementing the Init. function (22:13)
-
Programming : Developing a UART Driver - Implementing the Write function (5:39)
-
Programming : Developing a UART Driver - Testing the Driver (6:39)
-
Programming : Developing the System Timebase - Analyzing the Documentation (8:28)
-
Programming : Developing the System Timebase - Implementing the Init. function (9:52)
-
Programming : Developing the System Timebase - The rest of the functions (12:15)
-
Programming : Developing the System Timebase - Testing the Timebase (5:34)
-
Programming : BSP : Listing the out the Required Functions (7:55)
-
Programming : Writing the LED Driver (5:01)
-
Programming : Writing the PushButton Driver (4:00)
-
Programming : Testing the Board Support Package (3:35)
-
Programming : Analyzing the Documentation (5:21)
-
Programming : Listing out the steps for developing the ADC Driver (5:27)
-
Programming : Writing the ADC Initialization function (13:21)
-
Programming : Writing the ADC Read function (14:05)
The SIM7600 Communication Functions
-
Programming: Updating the Workspace (0:52)
-
Programming: Developing the Driver for the SIM7600 (7:17)
-
Programming: Implementing the SIM7600 MQTT Library Files (2:37)
-
Programming: Receiving Data from the SIM module into a Buffer (9:52)
-
Programming: Transmitting Data to the SIM Module (2:07)
-
Programming: Implementing the at_command_rx_tx( ) Function (8:46)
The SIM7600 MQTT Library
-
Programming: Implementing the test_at_command() Function (10:53)
-
Programming: Checking for Network Registration (8:57)
-
Programming: Implementing the mqtt_set_pdp_context() Function (5:29)
-
Programming: Starting the MQTT Service (1:22)
-
Programming Acquiring a MQTT Client (3:41)
-
Programming: Implementing the MQTT Publish Function (9:02)
-
Programming: Impementing the Termination Functions (3:07)
-
Programming: Implementing a Wrapper Function for the MQTT Client Configuration (7:07)
Developing a Second Client in Python
Testing the System
Using a Mobile App Client
Closing
