Setting Up
Essentials of Firmware Debugging
-
Getting familiar with the Debug View (24:59)
-
Working with the Instrumentation Trace Macrocell (ITM) (11:25)
-
Retargetting "printf()" and creating Log functions (15:28)
-
Debugging with UART - Analyzing the Documentation (16:21)
-
Debugging with UART - Writing the UART Driver (21:56)
-
Debugging with UART - Testing the UART Driver (13:21)
-
Debugging GPIO with Serial Wire Viewer (SWV) (13:13)
-
Source Code Download
Developing Bare-Metal Memory-to-Memory Direct Memory Access (DMA) Drivers
Developing Bare-Metal ADC DMA Drivers
Developing Bare-Metal ADC Timer Trigger DMA Drivers
Developing Bare-Metal UART DMA Drivers
-
Overview of the UART Protocol (7:49)
-
Listing the Steps (8:08)
-
Implementing the UART RX TX Initialization functions (11:00)
-
Implementing the DMA Stream RX TX Configuration function (Part I) (11:52)
-
Implementing the DMA Stream RX TX Configuration function (Part II) (17:35)
-
Implementing the DMA Stream RX TX Configuration function (Part III) (13:32)
-
Testing the UART DMA Driver (38:06)
Developing Bare-Metal SPI DMA Drivers
-
Understanding the SPI Protocol (11:19)
-
Analyzing the SPI Documentation (9:11)
-
Implementing the SPI DMA Initialization function (21:13)
-
Implementing the TX Stream Configuration function (15:46)
-
Implementing the RX Stream Configuration function (7:17)
-
Implementing the Transfer and Receive functions (14:21)
-
Implementing the MPU9250 Mems Device SPI DMA Driver (Part I) (18:09)
-
Implementing the MPU9250 Mems Device SPI DMA Driver (Part II) (28:57)
-
Implementing the MPU9250 Mems Device SPI DMA Driver (Part III) (4:24)
-
Implementing the MPU9250 Mems Device SPI DMA Driver (Part IV) (14:10)
-
Testing the MPU9250 Mems Device SPI DMA Driver (21:09)
Developing Bare-Metal I2C DMA Drivers
-
Understanding the I2C Protocol (9:21)
-
Analyzing the I2C Documentation (14:32)
-
Implementing the I2C DMA Initialization function (Part I) (11:50)
-
Implementing the I2C DMA Initialization function (Part II) (12:56)
-
Implementing the I2C DMA Tx Stream Initialization function (10:01)
-
Implementing the I2C DMA Rx Stream Initialization function (4:02)
-
Implementing the I2C DMA Stream Transfer function (9:11)
-
Implementing the I2C DMA Stream Receive function (6:17)
-
Implementing the I2C DMA Read function (37:08)
-
Implementing the I2C DMA Write function (5:57)
-
Implementing the I2C DMA Stream IRQHandlers (6:38)
-
Testing the I2C DMA Driver with the MPU9250 Mems Device (24:31)
Developing Bare-Metal PWM DMA Drivers
-
Understanding STM32 Timers (9:31)
-
Analyzing the PWM Documentation (9:40)
-
Implementing the PWM Initialization function (25:44)
-
Developing the "set_dutycycle()" function (16:28)
-
Implementing the PWM DMA Initialization function(Part I) (13:55)
-
Implementing the PWM DMA Initialization function(Part II) (20:25)
-
Testing the PWM DMA Driver (6:05)
More on Debugging
Developing Bare-Metal RTC Drivers
-
Understanding Real Time Clocks (10:49)
-
Listing the Steps for Configuring the RTC Calendar (8:16)
-
Implementing the RTC Calendar Initialization function (Part I) (11:57)
-
Implementing the RTC Calendar Initialization function (Part II) (18:19)
-
Setting the Timer Prescalers (15:10)
-
Exiting the Initialization Mode (13:15)
-
Getting the Calendar Information (7:51)
-
Testing the RTC Calendar Driver (16:16)
-
Implementing the RTC Alarm Initialization function (Part I) (16:24)
-
Implementing the RTC Alarm Initialization function (Part II) (11:05)
-
Implementing the RTC Alarm Interrupt Handler and Testing (17:51)
-
Analyzing the Steps to Configure the RTC Timestamp (5:28)
-
Implementing the RTC Timestamp Initialization function (7:35)
-
Implementing the RTC Timestamp Interrupt Handler (13:28)
-
Testing the RTC Timestamp Driver (10:15)
-
Implementing the RTC Tamper Detection Initialization function (9:58)
-
Testing the RTC Tamper Detection Driver (9:10)
Developing Bare-Metal Independent Watchdog (IWDG) Timer Drivers
Developing Bare-Metal Windowed Watchdog (IWDG) Timer Drivers
Developing Bare-Metal Drivers for Standby Mode and Wakeup
-
Implementing the Standby and Wakeup Setup Function (18:58)
-
Getting the Source of a "Reset" (9:53)
-
Testing the Standby and Wakeup Driver (10:33)
-
Analyzing Steps for Developing an RTC Wakeup Timer Driver (5:50)
-
Implementing the RTC Wakeup Timer Initializationf Function (13:18)
-
Implementing the "rtc_enter_standby_mode()" Function (8:28)
-
Testing the RTC Wakeup timer Driver (14:12)
Closing
