Introduction
Developing some System Drivers for Implementing Real World Examples
-
Programming : Enabling the Floating Point Unit (FPU) (18:00)
-
Programming : Developing a UART Driver - Analyzing the Documentation (11:35)
-
Programming : Developing a UART Driver - Listing out the steps (4:00)
-
Programming : Developing a UART Driver - Implementing the Initialization functi (22:13)
-
Programming : Developing a UART Driver - Implementing the Write function (5:39)
-
Programming : Developing a UART Driver - Testing the Driver (6:39)
-
Programming : Developing the System Timebase - Analyzing the Documentation (8:28)
-
Programming : Developing the System Timebase - Implementing the Init. function (9:52)
-
Programming : Implementing the rest of the timebase functions (12:15)
-
Programming : Testing the timebase (5:34)
-
Programming : System BSP- Listing out the required functions (7:55)
-
Programming : System BSP- Implementing the LED driver (5:01)
-
Programming : System BSP- Implementing the PushButton driver (4:00)
-
Programming : System BSP- Testing (3:35)
-
Programming : ADC Driver- Analyzing the documentations (5:21)
-
Programming : ADC Driver- Listing out the steps (5:27)
-
Programming : ADC Driver- Implementing the Init. functions (13:21)
-
Programming : ADC Driver- Implementing the ADC Read function (14:05)
-
Programming : SPI Driver - Analyzing theSPI documents (7:34)
-
Programming : Implementing the SPI GPIO Init. function (11:00)
-
Programming : Structures for SPI Parameters (15:29)
-
Programming : Configuration Parameters (15:41)
-
Programming : Implementing the Init. function (14:55)
-
Programming : Implementing the SPI Transmit function (Pt.1) (9:27)
-
Programming : Implementing the SPI Transmit function (Pt.2) (10:26)
-
Programming : Transmitting 16bit data (17:54)
-
Programming : Transmitting 8bit data (6:46)
-
Programming : Implementing the SPI receive function (11:05)
-
Programming : Testing the SPI Driver (15:47)
Introduction to Radio Frequency Identification (RFID)
The RFID Architecture
Introduction to Near Field Communication(NFC)
Working with MIFARE Card and Chips
Developing a Driver and Library for MIFARE MFRC522
-
Introduction (4:19)
-
Programming : Defining the Pinout (9:33)
-
Programming : Implementing the RST and CS Pins (5:42)
-
Programming : Implementing the MFRC522 Init. function (6:50)
-
Programming : Defining the PCD Commands (10:01)
-
Programming : Defining the MFRC522 Registers (11:29)
-
Programming : Defining the Commands for PICC and PCD Communication (15:03)
-
Programming : Defining PICC Types (3:58)
-
programming : Defining Key and UID Structures (6:19)
-
Notice
